Hits: 550 img
A straight dimethyl silicone oil is a fine general-purpose fluid — until the application adds one of three demands: controlled damping, radiation in the environment, or sustained heat near 300 °C. Each of those demands is exactly where the phenyl groups in the polymer chain change the game. IOTA 255 (polymethylphenylsiloxane) is IOTA's phenyl methyl silicone oil, and its spec sheet reads like a checklist for those three jobs.
Job 1: damping and anti-shock. Instrument dampers, shock-absorbing mounts and vibration control units need a fluid whose viscosity stays predictable over a wide temperature band — and IOTA 255 covers a viscosity window of 50 to 1000 cSt (25 °C), so the damping characteristic can be tuned by grade selection, not by reformulating. The official application list names damping and anti-shock first, alongside insulation and dust-proofing service.
Job 2: radiation resistance. Phenyl substitution is the standard answer when silicone fluids must keep their properties under radiation exposure — a requirement in instrumentation and specialized industrial environments where dimethyl fluids degrade faster.
Job 3: sustained high temperature. With a flash point of ≥ 300 °C (open cup) and an operating range of -70 to 320 °C, IOTA 255 serves as a heat carrier and as the base oil for high-temperature lubricating oils and greases — the roles where mineral oils and many synthetics oxidize first.
Specifications:
|
Item |
Value |
|
Appearance |
colorless or light yellow transparent liquid |
|
Viscosity (25 °C, cSt) |
50~1000 |
|
Relative density (25 °C) |
1.02~1.10 |
|
Flash point (open cup, °C) |
≥ 300 |
|
Freezing point (°C) |
≤ -40 |
|
Refractive index (25 °C) |
1.4600~1.5150 |
|
Operating temperature |
-70 ~ 320 °C |
Properties behind the numbers: high thermal stability, oxidation resistance, lubricity, radiation resistance and water stability.
Packaging: 25 kg or 200 kg drums. Store in clean, dry containers in a ventilated, dry warehouse. Non-toxic, non-dangerous goods. Shelf life: 3 years.
If your fluid spec says "damping" or "320 °C" anywhere in it, that is the signal to move from a dimethyl fluid to a phenyl methyl one — IOTA 255 covers both demands in a single product family.
Product page: www.kimiter.com/product-phenyl-methyl-silicone-oil-my255-.html