The use of fluorosilicone oil as a mold release agent is quite extensive, thanks to its unique properties and advantages. The following is a detailed analysis of the use of fluorosilicone oil as a mold release agent:


1. Performance advantages of fluorosilicone oil as a mold release agent
Good anti-stickiness and lubricity:
Fluorosilicone oil has a low surface tension and can form a uniform lubricating film on the mold surface, effectively reducing the adhesion between the mold and the product, so that the product can be easily demolded.
No corrosion to the mold:
Compared with other mold release agents, fluorosilicone oil has extremely low corrosion to the mold, which can protect the surface quality of the mold and extend the service life of the mold.
Non-toxic and safe:
Fluorosilicone oil is usually non-toxic and harmless, will not harm human health, and will not pollute the environment, and meets the requirements of modern industry for environmental protection and safety.
Wide range of application:
As a mold release agent, fluorosilicone oil is suitable for various mold materials, such as metal, plastic, rubber, etc., and is also suitable for various molding processes, such as injection molding, die casting, extrusion, etc.

2. Application fields of fluorosilicone oil release agent
Synthetic rubber industry:
In the production process of synthetic rubber products, fluorosilicone oil release agent can effectively reduce the adhesion between the mold and the rubber product, improve production efficiency, and protect the mold from corrosion.
Resin industry:
In the molding process of resin products, fluorosilicone oil release agent can ensure the smooth demolding of products, avoid scratches or deformation on the surface of products, and improve the quality of products.
Other industrial fields:
Fluorosilicone oil release agent is also widely used in industrial fields such as glass, ceramics, and metal processing, providing efficient demolding solutions for various molding processes.

3. Precautions for use
Mold cleaning and drying:
Before using fluorosilicone oil release agent, ensure that the mold surface is clean and dry to give full play to the effect of the release agent.
Use evenly:
The fluorosilicone oil release agent should be evenly applied on the mold surface to avoid local application too thick or too thin, which will affect the demolding effect.
Use in appropriate amount:
Excessive use of fluorosilicone oil release agent may cause residue on the surface of the product, affecting the appearance and performance of the product. Therefore, it should be used in appropriate amount according to the specific situation.
Storage conditions:
Fluorosilicone oil mold release agent should be stored in a dry and ventilated place, avoiding direct sunlight and high temperature environment to avoid affecting its performance and service life.

In summary, fluorosilicone oil as a mold release agent has significant performance advantages and a wide range of applications. During use, attention should be paid to key points such as mold cleaning and drying, uniform application, appropriate use, and storage conditions to ensure mold release effect and production efficiency.