Hydrogen Content Sets Crosslink Density: IOTA 203 Methyl Low-Hydrogen Silicone Oil (0.18 / 0.36 / 0.50 / 0.75 %) for Addition-Cure Silicone

Hits: 552 img

In addition-cure (platinum-catalyzed) silicone systems, the crosslink density is not a black box — it is set by the Si-H functionality of the hydrogen silicone oil you dose into the formula. IOTA 203 methyl low-hydrogen silicone oil makes that variable directly selectable, with four hydrogen-content grades in one product family.

One crosslinker, four densities

  • ✓ 0.18 % H — soft, high-elongation networks: gels, low-modulus encapsulants
  • ✓ 0.36 % H — the middle path: general-purpose addition-cure rubber
  • ✓ 0.50 % H — higher crosslink density for firmer compounds
  • ✓ 0.75 % H — maximum network density in the series for hard, dimension-stable parts

The Si-H groups react with vinyl groups (and hydroxyl groups) under catalyst action, so the same oil also serves as a chain modifier when dosed at low levels.

Beyond rubber

IOTA 203 is non-toxic and odorless, and is the basic raw material for foam levelling agents, defoamers, water-soluble silicone oils and pure bright ceramic antifouling agents — one Si-H platform across several formulation families.

Technical index

ITEM

IOTA 203

Viscosity, 25 ℃

80–120 mm²/s

Hydrogen content

0.18 / 0.36 / 0.50 / 0.75 %

Density, 25 ℃

0.98–1.10 g/cm³

Refractive index, 25 ℃

1.390–1.410

Packing & storage

200 L plastic drum (net 200 kg/drum), sealed tightly. Store in cool, dry, ventilated place, below 30 ℃, away from fire and heat sources. Do not mix with antioxidants, acids or edible chemicals.

Full specifications → https://www.kimiter.com/product-methyl-low-hydrogen-silicone-oil-my203.html

Online QQ Service, Click here

QQ Service

What's App