Fuel-Resistant Sealant Starts From the Right Hydroxyl Fluorosilicone Oil: IOTA 25O

Hits: 545 img

A fuel-resistant sealant fails at its weakest link: the base polymer. If the sealant sees fuel, oil and solvents, hydroxyl-terminated fluorosilicone oil is the raw material that sets both chemical resistance and cure behavior.

1. What IOTA 25O is

IOTA 25O is synthesized by polymerizing fluorosiloxane monomers with molecular ends modified by hydroxyl-bearing silicone materials. Beyond the general properties of methyl fluorosilicone oil, the terminal hydroxyl groups add reactivity: the oil can be cross-linked into elastomers or membranes, and medium-high viscosity grades serve as the base rubber for condensation-type room temperature vulcanized (RTV) fluorosilicone rubber.

The trifluoropropyl group brings excellent electrical insulation, high and low temperature resistance, high flash point and low freezing point — long-term service from -50°C to 250°C, with low viscosity-temperature coefficient, high compressibility, low surface tension, good hydrophobicity and moisture resistance, plus chemical and physiological inertness.

2. Specification (typical values)

Test

Homopolymer structure

Copolymer structure

Appearance

colorless or light yellow transparent liquid

colorless or light yellow transparent liquid

Fluorine content

100%

30%–60%

Viscosity (mPa·s, 25°C)

150–500,000

3,000–500,000

Volatile matter (150°C × 3h)

≤5%

≤5%

3. Two roles in one product

  • Base rubber and diluent for condensation-type RTV fluorosilicone rubber — the base material for sealants and mold adhesives that must survive fuel contact.
  • Structure control agent for fluorosilicone rubber: substituting it for diphenyl dihydroxysilane simplifies fluorosilicone rubber processing.

FAQ

Q: Homopolymer or copolymer — which to start with? A: Match fluorine content to the fuel exposure: homopolymer (100% fluorine content) for maximum oil and fuel resistance; copolymer (30%–60%) when the formulation must balance fuel resistance with flexibility or cost.

Q: Which viscosity for a sealant base? A: Medium-high viscosity grades are the starting point for RTV sealant bases; lower viscosities work as diluents to adjust paste rheology.

Handling note: keep the product neutral and away from acidic or alkaline substances; store below 35°C, shelf life 12 months; transported as non-hazardous.

Product page: https://www.kimiter.com/product-hydroxyl-fluorosilicone-oil-my-l-1001.html

Online QQ Service, Click here

QQ Service

What's App