Because of the epidemic situation, I believe that many people, like me, have been working on the project for a long time. It's nice to stay in my hometown, but many times, some things are easily damaged inadvertently, such as the data line of mobile phone. In just a few days, two iPhone braided charging wires died in succession. And it's still that kind of sudden leave without saying goodbye, apparently harmless, but just can't get into the working state. Ruthlessly, in addition to placing an order for two data lines, I bought another wireless charger to prevent the tragedy from happening again. This model is wpc02zm standing wireless charger, which is my first wireless charger. First love is a kind of thing, sometimes it's very eye-catching.
The whole millet vertical wireless charger is divided into two parts: charging board and base. From the material point of view, the wireless charging board, which is bent at an oblique angle, looks like a smaller version of Xiaomi's other wireless charging treasure. There's nothing to be picky about. The base is covered with an extra layer of anti-skid silicone pad. In fact, the all black modeling has a very design sense. If it is in a relatively closed office, it may have a relatively high force. But in the countryside, there are many people, plus sandstorm and dust. You will find that this dark product is really not resistant to dirt! It's not only easy to leave a mark on the wireless board, even on the silicone pad, it's easy to absorb some small things, and it's not easy to remove them. For Virgo players or students with cleanliness addiction, it may stop here.
After the millet vertical wireless charger is powered on, the LED light will flash three times, and then it will enter the working state. After entering the charging state, the LED light in front of the wireless charger will turn green. However, the design feeling here can be more humanized. For example, when the battery is charged, it flickers. When the battery is fully charged, it becomes normally on, which can play a role of reminder and differentiation.
However, with regard to the recognition speed of wireless charging, this wireless charger is quite satisfactory. My iPhone 8p is covered with a thick shell, but whether it is placed vertically or horizontally, it can enter the charging state in just one second by putting on the charging board.
When the phone is placed on the charging panel, if the LDE light is in the fast flashing state, it means that the phone is not in the charging state. In this case, it may be that the mobile phone shell is too thick, or there is foreign matter on the mobile phone shell that interferes with the work of the radio charging board. In introducing the vertical wireless charger, Xiaomi said that the intelligent FOD foreign matter detection technology can avoid the high temperature caused by keys and coins. However, obviously, the interference of foreign matters is not particularly good.
When using a metal back case with two turns larger than a common coin, such as the following figure, the recognition of the wireless charging board to the mobile phone is a bit intermittent, or even unable to recognize.
Compared with other flat wireless chargers, Xiaomi's vertical wireless charger may be more suitable for many office workers' life scenes. No matter where you put it, you don't need to pick up the mobile phone, you can see the status of the mobile phone at a glance, or even operate it directly. The whole charging experience is relatively smooth and will not be interrupted easily compared with those of flat type.
Finally, let's talk about the charging speed. As the first wireless charger to be used, how about the performance of other similar products? It's hard to give an answer here. When Xiaomi's vertical charger is used, it takes five minutes for the power to rise from 67% to 70% when the mobile phone is on the wireless hotspot. When charging for 20 minutes, the overall power is restored by 13%. Because this charger is only equipped with a standard data cable and charger, excluding the charging head, here I use the Xiaomi USB charger 36W (2 ports), so it should be able to achieve the 7.5W wireless charging supported by apple. In the publicity, the official said that in 35 minutes, it can fill 50% of the power of millet 9 pro. In this way, the charging speed is actually somewhat unsatisfactory. However, as a daily use, it is basically enough.
Most importantly, with two charging rings, the phone can be charged whether you put it horizontally or vertically. In this way, you can save money on a mobile phone stand and watch TV while charging. It should be noted that the temperature of the mobile phone will have a relatively obvious sense of warmth when it is used for charging under the conditions of watching movies and so on.
In addition, when using the non built-in usb-c cable to connect, I don't know why. It's a bit astringent. It's not as smooth as the original cable.
The first time I use the wireless charger, the performance of this millet vertical wireless charger, in fact, is quite standard. If there is anything that makes my eyes bright, it is probably that his size is much smaller than I imagined. The overall height is only about two-thirds of that of the iPhone 8p, and the width of the chassis is slightly 2-3cm wider than that of the 8p. Any small bag can basically be carried around. I hope that this less than 100 yuan product can bring me a new charging experience in a longer time.
So, will you buy such a millet standing wireless charger?