Water-based inks are mainly water-based, so there will be phenomena such as poor curing, slow drying, uneven ink color, and blurring. Hue is not allowed Reason analysis: The viscosity of the water......
2022-09-24Like the composition of general printing inks, water-based inks usually also have colorants, binders, auxiliary agents and other components. Colorants are the coloring substances of water-based inks, ......
2022-09-24Water-based inks, which can be diluted with water or ethanol, can be rinsed with tap water, but are capable of forming a water-resistant film after drying on the substrate. The biggest advantage of wa......
2022-09-21The linear dimethyl silicone oil with Si-O-Si as the main chain and the methyl group connected to the silicon atom has a helical structure due to the small intermolecular force, and the methyl group i......
2022-09-21(1) Adequate mixing of liquid silica gel Precise mixing ratio: LSR is a two-component raw material of A and B. Before injection molding, it must be fully mixed according to an accurate 1:1. If it is ......
2022-09-19Addition type liquid silicone rubber is based on linear polysiloxane containing vinyl group as base polymer, and oligomeric siloxane containing silicon hydrogen bond as vulcanization crosslinking agen......
2022-09-194. Injection point Cold runner system is used when molding LSR. Maximize the benefits of this compound and maximize productivity. By processing the product in such a way, it is not necessary to remov......
2022-09-16The structure of the injection mold for thermoset liquid silicone rubber (LSR) is generally similar to the mold structure used for thermoplastic compounds, but there are many significant differences. ......
2022-09-16Whether rain sensors or plug connectors in the automotive sector, optical pulse measurement or baby pacifiers in medical technology – injection moulded parts made of liquid silicone or liquid silicone......
2022-09-15The liquid silicone rubber injection molding process is as follows: the two liquid silicone rubber raw materials A and B are accurately metered by the metering device and then transported to the mixin......
2022-09-155. Demoulding The vulcanized liquid silicone rubber easily adheres to the surface of the metal, and the flexibility of the product makes it difficult to demold. The high temperature tear strength of ......
2022-09-093. Exhaust Exhaust is mainly achieved through grooves located on the parting line, such grooves must be in the area where the injection compound finally arrives. This helps avoid internal air bubbles......
2022-09-09The structure of the injection mold for thermoset liquid silicone rubber (LSR) is, in general, similar to the mold structure used for thermoplastic compounds, but there are many significant difference......
2022-09-09Rapidly changing technology trends in electric vehicle manufacturing are driving silicone manufacturers to take innovative approaches to producing custom products. The solution of liquid silicone rubb......
2022-09-08The main chain of the silicone rubber (SR) raw rubber molecule is composed of Si-O bonds, and the side groups are mainly methyl groups. Depending on the type of silicone rubber, some methyl groups can......
2022-09-08