It is suitable for filling and duplicating of light curing resin material in dental technology laboratory.
Such as: pressing plastic facing, positioning guide plate, etc.
accurate
Suitable fluidity and consistency, excellent detail reduction ability after curing, no deformation, more accurate restoration;
transparent
The light of light curing can penetrate the irradiated material, and then light curing can be carried out in an oxygen free environment, making the restoration more accurate;
High hardness
After solidification, the hardness reaches 72shore a, which is the same as heavy body, and can be repeated many times.
One
The wax type is embedded, and TRANSIL f silicone rubber is injected into the SR nexco flask molding box to make the impression.
Two
Fill in the TRANSIL f impression with SR nexco master resin of corresponding model;
Three
After placing the top cover of the flask molding box, fully tighten the screws in clockwise direction;
Four
Place the flask box on the tray in the polymerization bin of the progriprint cure high-performance LED light curing polymerization equipment, close the bin door, and select the corresponding program on the touch panel for curing.
Sales contact:
Luna: 136 832 73641
Hu Fenglei: 185100 23127
Liu Jianhua: 158 112 96106
Xu Yanan: 185183 70691
Weijiahua dental equipment agency brand
Ivoclar Vivadent
Noritak (Zewu)
Dunsberginord
Wieland
Amann Girrbach
Cloud a technology
Liantai eward 3D printing
WJH series steam cleaner
Smile line, Switzerland
Connell zirconium block
VITA