Mingyi Silicone(Anhui) Co., Ltd.
The purpose of the precipitation method of carbon black for off-road tire tread is to reduce its heat generation, improve its heat resistance and its ability to resist chipping. According to reports, ......
2019-11-261, alcohol and alcohol amine active agents Adjuvants such as alcohols and alcohol amines, such as polyethylene glycol (PEG) and triethanolamine, are first adsorbed by white carbon black during rubber......
2019-11-261. The storage of white carbon black absorbs moisture in the air, and makes its structure stable, that is, moisture absorption. 2. When the white carbon black rubber compound is mixed, it is easy t......
2019-11-26Silica used in truck tires to improve the puncture resistance and tear resistance of the tread. Precipitation method is particularly suitable for its tread because it not only reduces rolling res......
2019-11-26Precipitation method of white carbon used in carbon black filled passenger tire tread rubber can greatly improve the performance of various tires. Combining precipitation carbon dioxide with high d......
2019-11-26Polyethylene glycol (PEG) is very common and is useful in various industries. It mainly neutralizes the acidity of fillers in rubber, accelerates the vulcanization rate and crosslinking density, has g......
2019-11-26The structuring of silicone rubber is a common problem. Silica causes structure of silicone rubber, which is mainly based on the large amount of hydrogen bonding between silica and high molecular weig......
2019-11-26High-strength white carbon black, surface-treated white carbon black and some special compounding agents in silicone rubber; use silicone rubber together with other organic polymers to improve tear re......
2019-11-25With the continuous development and innovation of the silicone industry, due to the wide application of silicone products in various industries, there are more and more silicone products on the market......
2019-11-25Filling or pouring mold is used for relatively smooth or simple products. No mold line saves time and labor, it is the product or model you want to copy, surrounded by rubber or glass. Put the vacuume......
2019-11-25The silicone rubber is kneaded by adding white carbon black, silicone oil, etc. to form a rubber compound, and then rolled out of the sheet. Films produced by calendering have significant differences ......
2019-11-25Extruded silicone products are usually formed by extrusion of extruded silica gel. Generally, the shape of extruded silicone is long, tubular can be cut at will, and the shape of the product made by e......
2019-11-25This process is relatively high quality requirements, is a combination of liquid silicone and plastic. Its products are characterized by good thermal stability, cold resistance, excellent electrical i......
2019-11-25This process is the most common. It is mainly completed by the mold, and the shape of the mold determines the shape of the silicone product. Molded silicone products are usually formed by applying a p......
2019-11-251. The surface tension is small (easy to leak from the machine). 2. Gas solubility is large (it is difficult to design a gas seal device). 3. Silicone oil has a large thermal expansion coefficient (......
2019-11-25
